LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (5.7L - DTCS P2317 To U148C - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> U11E8-Lost Communication With EPS Steering Torque Message >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) doesn't receive a torque message signal from the Electric Power Steering Module over the CAN C bus. One Trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals