LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 426 (5.7L - DTCS P058C To P1495 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P141D-Starter Relay Feedback Open Circuit Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The PCM monitors the Ignition Crank Sense circuit voltage. The Ignition Crank Sense circuit is connected to the Starter Solenoid Feed circuit inside the PDC. During an engine cranking event the PCM expects to see 12 volts at the Ignition Crank Sense circuit. If no voltage is detected a fault is set.

scientia non olet · About LEMON Manuals