Set Condition
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The Fuel Pump Control Module (FPCM) loses the ability to detect short circuits, output state, overvoltage, and thermal runaway. Sets the MIL code after failure matures for 60 seconds. When this DTC is set; The FPCM will continue to run the Fuel Pump Module in the normal mode at the duty cycle commanded by the PCM. This is an internal FPCM fault.