LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 426 (5.7L - DTCS P058C To P1495 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P060E-Etc Level 2 TPS Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

When secondary software determines that TPS 1 and TPS 2 signals do not match for a period of time. One trip fault. ETC lamp will flash. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals