Set Condition
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The Duty Cycle command from the Powertrain Control Module (PCM) to the Fuel Pump Control Module (FPCM) on the FPCM Control circuit is outside the calibrated threshold. Sets the MIL code after the failure matures for 60 seconds. When this DTC is set; The FPCM will continue to run the Fuel Pump Module at 100% duty cycle.