LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (5.7L - DTCS B1810 To P0204 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P0141-O2 Sensor 1/2 Heater Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects no temperature change in the O2 Sensor 1/2 Heater element when the heater circuit is active. The heater temperature is obtained by measuring the heater resistance and calculating the heater temperature. Two trip fault. Three good trips to turn off the MIL.

scientia non olet · About LEMON Manuals