LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (5.7L - DTCS B1810 To P0204 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P0016-Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1 >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
CRANKSHAFT POSITION SENSOR CIRCUIT WIRING OR CONNECTORS
CAMSHAFT POSITION SENSOR CIRCUIT WIRING OR CONNECTORS
CRANKSHAFT, TONE WHEEL OR FLEX PLATE
CAMSHAFT, TONE WHEEL OR PULSE RING
TIMING GEAR ALIGNMENT
CRANKSHAFT POSITION SENSOR
CAMSHAFT POSITION SENSOR

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  STANDARD PROCEDURE  .