Theory Of Operation
WARNING: This page is about a different car, the 2013 RAM 2500 HD and 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The Speed Control Switch is hard wired to the Steering Column Control Module (SCCM). The SCCM includes the steering column shroud, the Steering Angle Sensor (SAS), the Clockspring, the Multi-function Switch, a Steering Column Power Tilt and Telescope Switch (if equipped), and a trim cover. The SCCM is located near the top of the steering column below the steering wheel. The speed control and SAS messages are bussed to the Powertrain Control Module (PCM) via the Can Bus.