LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Integrated Trailer Brake Module (ITBM) - Electrical Diagnostics - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> C10C7-19 Electronic Trailer Brake Control Output - OVERCURRENT >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

If the Integrated Trailer Brake Module (ITBM) is configured incorrect or an output over current to the trailer brakes is present, this code will set. Automatic braking and manual lever braking (squeeze switch) are disabled.

scientia non olet · About LEMON Manuals