LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Vehicle Theft Security (Service Information)) >> SWITCH, Hood Ajar >> Installation >> Bracket

SWITCH, Hood Ajar: Installation: Bracket

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Ajar Switch & Mounting Bracket
GC0086783Courtesy of CHRYSLER LLC
  1. Position the hood ajar switch mounting bracket (3) onto the upper radiator cross member (1)
  2. Install and tighten the fastener (2) that secure the mounting bracket to the upper radiator cross member, tighten the bolt to 5.5 N.m (4 ft lbs.).
  3. Reinstall the hood ajar switch (2) into the mounting bracket, refer to SWITCH, Hood Ajar , Installation .
scientia non olet · About LEMON Manuals