LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> ROTOR, Brake >> Removal >> Front - Heavy Duty

Front - Heavy Duty

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Hoisting , Standard Procedure .
  2. Remove the wheel and tire assembly.
    NOTE:

    Do not allow brake hose to support caliper adapter assembly.

  3. Remove the caliper from the steering knuckle, and remove caliper adapter assembly. Refer to CALIPER, Disc Brake , Removal .
  4. With Dual Rear Wheels (DRW) only, remove the extension to the rotor nuts and remove the extension.
  5. Remove the rotor from the hub/bearing wheel studs.
scientia non olet · About LEMON Manuals