Rear - Light Duty
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ROTOR |
| 2 - CALIPER ADAPTER |
| 3 - CALIPER |
- Install the rotor (1) to the axleshaft.
- Install the caliper adapter (2). Refer to ADAPTER, Disc Brake Caliper , Installation .
- Install the caliper adapter bolts and tighten the mounting bolts to 163 N.m (120 ft.lbs).
- Install the disc brake caliper (3). Refer to CALIPER, Disc Brake , Installation .
- Install the tire and wheel assembly. Refer to Specifications .
- Remove the support and lower the vehicle.