Rear - Heavy Duty

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Rotor

Courtesy of CHRYSLER LLC

1 - ROTOR

2 - CALIPER ADAPTER

3 - CALIPER

Install the rotor (1) to the axle shaft.
Install the caliper adapter (2). Refer to ADAPTER, Disc Brake Caliper , Installation .
Install the caliper adapter bolts and tighten to 328 N.m (242 ft.lbs).
Install the disc brake caliper (3). Refer to CALIPER, Disc Brake , Installation .
Install the tire and wheel assembly. Refer to Specifications .
Remove the suppoorts and lower the vehicle.