Front - Light Duty
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CALIPER |
| 2 - ROTOR |
| 3 - HUB/BEARING |
| 4 - KNUCKLE |
| 5 - CALIPER ADAPTER BOLT |
- Install the rotor (2) onto the hub/bearing (3).
- Install the caliper adapter assembly (1). Refer to CALIPER, Disc Brake , Installation .
- Install the wheel and tire assembly. Refer to Specifications .
- Remove the supports and lower the vehicle.
- Apply the brakes several times to seat the brake pads. Be sure to obtain a firm pedal before moving the vehicle.