LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> ROTOR, Brake >> Installation >> Front - Heavy Duty

Front - Heavy Duty

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rotor on the hub.
  2. With Dual Rear Wheels (DRW) only, install the hub extension and nuts to the front rotor. Tighten nuts to 173.5 N.m (128 ft.lbs). HD DRW ONLY. 
  3. Install the rotor onto the hub/bearing wheel studs.
  4. Install the caliper adapter assembly, and tighten adapter bolts to: Refer to CALIPER, Disc Brake , Installation .
  5. Install the wheel and tire assembly, and lower the vehicle. Refer to Wheels , Standard Procedure .
  6. Apply the brakes several times to seat brake pads. Be sure to obtain firm pedal before moving vehicle.
scientia non olet · About LEMON Manuals