LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> PADS, Brake >> Removal >> Front - Light Duty

Front - Light Duty

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Caliper Bolt
GC0083366Courtesy of CHRYSLER LLC
  1. Raise and support vehicle. Refer to Hoisting , Standard Procedure .
  2. Remove the wheel and tire assemblies.
  3. Compress the caliper (2).
  4. Remove the caliper slide pin bolts (4).
    Fig 2: Caliper Removal/Install
    GC0091565Courtesy of CHRYSLER LLC
  5. Remove the caliper (1) from the caliper adapter (2).
    NOTE:

    Do not allow brake hose to support caliper assembly.

  6. Support and hang the caliper.
    Fig 3: Identifying Brake Pads
    GC0083367Courtesy of CHRYSLER LLC
  7. Remove the inboard brake pad (4) from the caliper adapter (1).
  8. Remove the outboard brake pad (2) from the caliper adapter (1).
    Fig 4: Identifying Brake Pad Anti-Rattle Clips
    GC0083368Courtesy of CHRYSLER LLC
  9. Remove the anti-rattle clips (1) from the pad (2).
scientia non olet · About LEMON Manuals