LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 394 (Power Distribution - 2500 Hd & 3500 Hd) >> Module, Power Inverter >> Removal >> Removal

Module, Power Inverter: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Seat Cushion J-Channel & Power Inverter Module
GC0087767Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Release the seat cushion j-channel (1) from the seat frame to gain access to the power inverter module (2).
    Fig 2: Identifying Power Inverter Mounting Bracket Retainers
    GC0087768Courtesy of CHRYSLER GROUP, LLC
  3. Lift up on the seat cushion and remove the four power inverter mounting bracket retainers (1).
  4. Disconnect the power inverter electrical connector and remove the power inverter assembly from the vehicle.
    Fig 3: Removing/Installing Power Inverter Assembly
    GC0087769Courtesy of CHRYSLER GROUP, LLC
  5. Remove the screws (1) holding the power inverter (2) to the mounting bracket.
  6. Remove the power inverter.
scientia non olet · About LEMON Manuals