Spark Plug: Removal: 5.7L
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove all nthe necessary air filter tubing and air intake components at the top of the engine and at the throttle body. Refer to BODY, AIR CLEANER, REMOVAL, 5.7L , BODY, AIR CLEANER, REMOVAL, 5.7L CNG or BODY, AIR CLEANER, REMOVAL, 6.7L DIESEL .
- Prior to removing the ignition coil, spray compressed air around the base of the ignition coil at the cylinder head.
- Remove the ignition coil (1). Refer to COIL, IGNITION, REMOVAL .
- Prior to removing the spark plug, spray compressed air into the cylinder head opening.
- Remove the spark plug from the cylinder head using a quality thin wall socket with a rubber or foam insert.
- Inspect the spark plug condition.