Capacitor, Ignition: Installation: 4.7/5.7
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER GROUP, LLC
| 1 - COIL CAPACITOR |
| 2 - MOUNTING STUD |
| 3 - GROUND STRAP |
| 4 - MOUNTING NUT |
| 5 - ELEC. CONNECT. |
- Position capacitor (1) to mounting stud (2).
- Position ground strap (3) to mounting stud (2).
- Tighten nut (4) to 7 N.m (60 in. lbs.) torque.
- Connect electrical connector (5) to coil capacitor.