LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Heated Seats (Service Information) 2500 Hd & 3500 Hd) >> Switch, Heated Seat >> Installation >> Front

Switch, Heated Seat: Installation: Front

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Switch Pod Fasteners
GC0087598Courtesy of CHRYSLER GROUP, LLC
  1. Align the switch pod to the instrument panel center bezel.
  2. Install the lower switch pod fastners(2) to the center bezel.
  3. Connect the switch pod electrical connector.
  4. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals