Trip Mode

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The trip computer provides a customer programmable choice of displaying units in English or metric measure. The following information can be selected for display at the top of the EVIC screen:

Average (Kilometers/Miles) Per Gallon - Average fuel economy achieved since last reset.
Distance To Empty - Estimated distance (kilometers or miles) until the fuel tank is empty.
Trip A - Distance (kilometers/miles) since last Trip A odometer reset.
Trip B - Distance (kilometers/miles) since last Trip B odometer reset.
Elapsed Time - Total time the ignition switch has been in the ON and ACCESSORY positions since the last elapsed time reset.

The EVIC trip computer features several functions that can be reset. Pressing and releasing the SELECT / RESET push button once will reset the function currently being displayed in the EVIC. To reset all functions (global reset), press and release the SELECT / RESET push button a second time within 3 seconds of resetting the currently displayed function. >Reset ALL will be displayed during this 3 second window.

The odometer is displayed at the bottom of the EVIC display. If warnings exist, they will replace the odometer in the display. The operator can scroll to view information in the EVIC by using the DOWN / SCROLL push button.