Diagnostic Test
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK IF THE DTC IS ACTIVE
- With a scan tool, read and record Radio DTCs.
- With the scan tool, erase Radio DTCs.
- Turn the ignition off and remove the key from the ignition.
- Turn the ignition on, wait one minute.
- With the scan tool, read Radio DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace the radio in accordance with service information.
Refer to RADIO, REMOVAL .
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Test complete. The DTC is not active at this time.
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
- Replace the radio in accordance with service information.