LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Audio (Radio) - Electrical Diagnostics - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> B142A-4B-Radio Unit High Temperature - Over Temperature >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. VERIFY THAT DTC B142A-4B-RADIO UNIT HIGH TEMPERATURE - OVER TEMPERATURE. 
    1. With the scan tool, erase the Audio DTCs.
    2. Start the engine and allow the engine to reach normal operating temperature.
    3. If the vehicle has been in the hot sunlight or extreme cold, move the vehicle indoors and open the doors to allow the inside temperature to stabilize.
    4. The Radio should operate between -23°C and 65°C (-10°F and 149°F).
    5. With the scan tool, read the DTCs.

      Does the scan tool display, B142A-4B-RADIO UNIT HIGH TEMPERATURE - OVER TEMPERATURE?

      Yes 

      • Replace the Radio in accordance with the Service Information.
      • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .

      No 

      • Test Complete.