6.7L Diesel

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Field Wire Connector

Courtesy of CHRYSLER GROUP, LLC

WARNING:

Disconnect both negative cables from both batteries before removing battery output wire (B+ wire) from generator. Failure to do so can result in injury or damage to electrical system.

Disconnect both negative battery cables.
Remove the serpentine drive belt. Refer to BELT, SERPENTINE, REMOVAL .
Disconnect field wire connector (3) from the generator.

Fig 2: Plastic Insulator Cap, B+ Output Terminal & Nut
Courtesy of CHRYSLER GROUP, LLC
Unsnap plastic insulator cap (1) from B+ output terminal.
Remove nut (2) and the B+ cable (1) from generator.

Fig 3: Generator & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove bolts (2) and the generator (1) from engine.