6.7L Diesel-Dual
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Disconnect both negative cables from both batteries before removing battery output wire (B+ wire) from generator. Failure to do so can result in injury or damage to electrical system.
- Disconnect both negative battery cables.
- Remove engine oil dipstick.
- Remove fasteners and the engine cover.
- Remove the serpentine drive belt. Refer to BELT, SERPENTINE, REMOVAL .
- Disconnect field wire connector (3) from the generator.
- Unsnap plastic insulator cap (1) from B+ output terminal.
- Remove nut (2) and the B+ cable (1) from generator.
- Remove bolts (2) and the generator (1) from engine.
- If necessary, remove the lower generator mounting bracket bolts (1).
- If necessary, remove bolts (1) and the generator mounting bracket (2).