LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Emissions Control - 2500 Hd & 3500 Hd) >> Evaporative Emissions, 6.7L Diesel >> Sensor, Crankcase Pressure >> Removal >> Crankcase Pressure Sensor 1

Crankcase Pressure Sensor 1

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Cover, Bolts & Oil Dipstick
GC0155408Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect both negative battery cables.
  2. Remove the engine oil dipstick (3).
  3. Remove fasteners (1, 4) and the engine cover (2).
    Fig 2: Locating Crankcase Pressure Sensor
    GC0110278Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the Crankcase Pressure Sensor wire harness connector (7).
  5. Remove bolt (6) and the Crankcase Pressure Sensor (5) from valve cover (4).
scientia non olet · About LEMON Manuals