6.7L Diesel
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect both negative battery cables.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Saturate the clamp nuts with heat valve lubricant. Allow 5 minutes for penetration.
- Disconnect the exhaust tailpipe (3) hanger rods from isolators (2).
- Loosen band clamp nut (4) and remove the tailpipe (3) from the vehicle.