Muffler, Exhaust: Removal: 5.7L
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - INSULATOR |
| 2 - INSULATOR |
| 3 - MUFFLER |
| 4 - INSULATOR |
- Raise and support the vehicle.
- Saturate the clamp nuts with spray lubricant. Allow 5 minutes for penetration.
- Remove the tailpipe assembly Refer to TAILPIPE, EXHAUST, REMOVAL .
- Loosen clamps and nuts from muffler assembly (3).
- Remove the muffler assembly (3) from the isolators (1, 2 and 4).