LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Cooling System - 2500 Hd & 3500 Hd) >> Specifications >> Torque

Section 356 (Engine Cooling System - 2500 Hd & 3500 Hd): Specifications: Torque

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION  N.m  Ft. Lbs.  In. Lbs. 
Bolt - Automatic Belt Tensioner to Block 41 30 -
Bolt - Automatic Belt Tensioner Pulley 61 45 -
Engine Mounted Fan Shroud Brackets (Upper and Lower) 24 18 -
Fan Shroud Ring to Fan Shroud Brackets 12 9 106
Bolt - Block Heater 12 - 106
Bolts - Generator Mounting Bracket      
Front horizontal mounting bolts 54 40 -
Rear vertical mounting bolt 40 30 -
Bolts - Fan Shroud to Radiator Mounting 10 7 89
Bolts - Radiator to Support 8 - 71
Bolts - Fan Blade to Viscous Fan Drive 24 18 -
Fan Drive 25 18 -
Bolts - Thermostat Housing 13 10 115
Bolts - Power Steering Oil Cooler 8 - 71
Bolts - Transmission Auxiliary Oil Cooler 6 - 53
Nuts - Transmission Oil Cooler Tube 31 23 -
Bolts - Coolant Recovery Container 8 - 71
Tube Nut - Fan Motor - Pressure Line 47 35 -
Tube Nut - Fan Motor - Return Line 29 21 -
Plug - Bleed 6 - 53
Tube Nuts - Transmission Oil Cooler to Transmission 20 15 -
Bolts - Water Pump - 3.7L/4.7L 58 43 -
Bolts - Water Pump - 5.7L 24 18 -