Sensor, Coolant Temperature: Installation: 5.7L

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Temperature Sensor & Thermostat (5.7L)

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Viscous fan, fan shroud and electric cooling fan removed for clarity.

Apply thread sealant to the engine coolant temperature (ECT) sensor (2) threads.
Install the ECT sensor (2) into engine.
Tighten the ECT sensor (2) to 11 N.m (8 ft. lbs.).
Connect the electrical connector to the ECT sensor (2).
Fill the cooling system the proper level. Refer to STANDARD PROCEDURE .