LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Cooling System - 2500 Hd & 3500 Hd) >> Accessory Drive >> Pulley, Idler >> Removal >> 6.7L Diesel

6.7L Diesel

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upper Radiator Shroud
GC0137085Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect both negative battery cables.
  2. Remove the upper radiator shroud (1).
    Fig 2: Identifying Drive Belt (Diesel With A/C)
    GC0108063Courtesy of CHRYSLER GROUP, LLC
  3. Remove the serpentine belt (2). Refer to TENSIONER, BELT, REMOVAL .
    Fig 3: Idler Pulley & Bolt
    GC0155365Courtesy of CHRYSLER GROUP, LLC
  4. Remove bolt (2), and the idler pulley (1).