LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Cooling System - 2500 Hd & 3500 Hd) >> Accessory Drive >> Pulley, Idler >> Removal >> 5.7L

Pulley, Idler: Removal: 5.7L

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt (5.7L Engine)
GC0091800Courtesy of CHRYSLER GROUP, LLC
  1. Remove the accessory drive belt (4). Refer to TENSIONER, BELT, REMOVAL .
  2. Remove the bolt from the idler pulley (2).
  3. Remove the idler pulley (2).
scientia non olet · About LEMON Manuals