LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Cooling System - 2500 Hd & 3500 Hd) >> Accessory Drive >> Belt, Serpentine >> Removal >> 6.7L Diesel Engine

6.7L Diesel Engine

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Idnetifying Drive Belt (Diesel Without A/C)
GC0108062Courtesy of CHRYSLER GROUP, LLC
Fig 2: Identifying Drive Belt (Diesel With A/C)
GC0108063Courtesy of CHRYSLER GROUP, LLC
Fig 3: Identifying Belt (Diesel With Dual Generator)
GC0157543Courtesy of CHRYSLER GROUP, LLC
  1. A 1/2 inch square hole is provided in the automatic belt tensioner (6). Attach a suitable tool into this hole.
  2. Rotate tensioner assembly clockwise (as viewed from front) until tension has been relieved from belt.
  3. Remove belt from water pump pulley first.
  4. Remove belt from vehicle.
scientia non olet · About LEMON Manuals