LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 ((Antilock Brake System (Abs) - Electrical Diagnostics - 2500 Hd & 3500 Hd)) >> Diagnosis And Testing >> C1223-01-Brake Pedal Travel Sensor Supply - General Electrical Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

When the Anti-lock Brake System (ABS) Module detects that the Brake Pedal Position (BPP) Sensor is indicating less than 4.75 volts or greater than 5.25 volts for more than 500 msec. The BCM has a 15 sec debounce, except at power-up when it is two seconds if the fluid was low on the previous ignition cycle.