LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 ((Antilock Brake System (Abs) - Electrical Diagnostics - 2500 Hd & 3500 Hd)) >> Diagnosis And Testing >> C0042-62-Brake Pedal Position Sensor - Signal Compare Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

If Anti-lock Brake System (ABS) Module sees brake pressure, but no corresponding with Brake Pedal Position (BPP) Sensor voltage for two seconds.

NOTE:

If any other DTCs are present, repair them first before continuing with this diagnostic procedure.

scientia non olet · About LEMON Manuals