LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 351 (6.7L Engine (Service Information) - 2500 Hd & 3500 Hd) >> Lubrication >> Switch, Oil Pressure >> Removal >> Removal

Switch, Oil Pressure: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Pressure Switch Wire Harness Connector
GC0155311Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect both negative battery cables.
  2. Disconnect the oil pressure switch wire harness connector (1).
    Fig 2: Oil Pressure Switch, Bolt & O-Ring Washer Seals
    GC0155243Courtesy of CHRYSLER GROUP, LLC
  3. Remove bolt (2) and the oil pressure switch (1) and elbow from the engine block.
scientia non olet · About LEMON Manuals