Jet, Piston Oil Cooler: Installation: Installation

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Oil Jet Piston Cooling Nozzles

Courtesy of CHRYSLER GROUP, LLC

CAUTION:

Use caution when removing and installing oil jets. Damage to oil jet nozzle could cause severe engine damage.

Lubricate oil jet O-ring seal.
Install oil jet (1). Tighten bolt to 15 N.m (133 in. lbs.).

Fig 2: Block Stiffener & Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the engine block stiffener. Tighten bolts (1) to 43 N.m (32 ft. lbs.).
Install the oil pan. Refer to PAN, OIL, INSTALLATION, 6.7L .
Connect the negative battery cable.