LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Heating & Air Conditioning (Service Information) - 2500 Hd & 3500 Hd) >> Specifications >> Fastener Torque

Fastener Torque

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Description  N.m  Ft. Lbs.  In. Lbs. 
All Screws NOT Listed Below 1.1 - 10
A/C Compressor to Engine Specific fastener placement and torque pattern is required. See INSTALLATION  for more information.
A/C Condenser Bolts 2.2 - 20
A/C Compressor Clutch Plate Bolt 19 - 168
A/C Expansion Valve Bolts 11 - 97
A/C Heater Control Screws 2.2 - 20
Air Ducts to Instrument Panel Screws 2.2 - 20
Blower Motor Screws 1.7 - 15
HVAC Housing to Engine Side of Dash Panel Nuts 6.8 - 60
HVAC Housing to Floor Bracket Bolt 6.8 - 60
HVAC Housing to Passenger Side of Dash Panel Nuts 6.8 - 60
Refrigerant Lines Nuts/Bolts 23 17 -