A/C Clutch
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Typical A/C clutch assembly shown in illustration.
The A/C compressor clutch assembly consists of a stationary electromagnetic field coil (4), bearing and pulley assembly (3), shims (7) and a clutch plate (2) that is splined to the compressor shaft and secured by a bolt (1). These components provide the means to engage and disengage the A/C compressor from the engine accessory drive belt.
The A/C clutch bearing and pulley assembly is retained to the front of the compressor with a snap ring (6). The A/C clutch field coil is also retained to the front of the compressor using a snap ring (5).