LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 345 (Rear Axle - 10 1/2 Aa - 2500 Hd & 3500 Hd) >> Case Assembly, Differential, Electric Locker >> Diagnosis And Testing >> Diagnosis And Testing - Electric Locker Differential

Diagnosis And Testing - Electric Locker Differential

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position vehicle on host with wheels of the ground.
  2. Turn key to the on position.
    NOTE:

    System will time out within 2 minutes, when the key is in the on position and the engine is not running.

  3. Place vehicle in drive/first gear and transfer case in LOW LOCK.
  4. Activate locker switch.
  5. Hold one wheel and rotate the other wheel which should lock once the dog clutch is aligned.
  6. Turn off locker switch.
  7. Hold one wheel and rotate the other wheel which should turn.
NOTE:

Only the locker actuator with sensor are serviced. Internal differential components are serviced as a differential case assembly.

scientia non olet · About LEMON Manuals