Torque Specifications
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Front Driveshaft to Front Axle Bolts | 115 | 85 | - | Do not reuse these fasteners. If removed, NEW fasteners must be installed and tightened to specifications. |
| Rear Driveshaft Center Support Bearing Bolts | 54 | 40 | - | |
| Rear Driveshaft to Rear Axle Bolts M10 | 75 | 55 | - | Do not reuse these fasteners. If removed, NEW fasteners must be installed and tightened to specifications. |
| Rear Driveshaft to Rear Axle Bolts M12 | 115 | 85 | - | Do not reuse these fasteners. If removed, NEW fasteners must be installed and tightened to specifications. |
| Rear Driveshaft to Transmission Output Flange | 75 | 55 | - | Do not reuse these fasteners. If removed, NEW fasteners must be installed and tightened to specifications. |