Remote Switch Test

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

To check switch, follow the steps below to check for switch continuity.

Power-Out

Move switch to the power-out position.

Fig 1: Switch Pins
Courtesy of CHRYSLER GROUP, LLC
Check for continuity between pins (1) and (4).
Check for continuity between pins (2) and (5).

Power-In

Move switch to the power-in position.

Fig 2: Switch Pins
Courtesy of CHRYSLER GROUP, LLC
Check for continuity between pins (1) and (4).
Check for continuity between pins (2) and (3).

If there is no continuity, then the remote switch is bad and needs to be replaced.