Right Rear Cable
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not over-bend cable during installation process. Damage to internal/external sleeve may occur.
| 1 - SUPPORT PLATE |
| 2 - CABLE |
| 3 - LEVER |
- Install the brake cable (2) to the brake lever (3).
- Install the cable bracket to the shock bracket.
- Install the cable to the axle bracket.
- Install the cable to the frame bracket.
- Install the right cable to the equalizer.
- Install the right cable to the front cable.
- Adjust the brake cable at the equalizer and using the adjuster nut.