Rear Dual Wheels

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Rotor & Hub (Dual Wheel)

Courtesy of CHRYSLER GROUP, LLC

Raise and support the vehicle
Remove the tire and wheel assembly.
Remove the disc brake caliper. Refer to CALIPER, DISC BRAKE, REMOVAL .
Remove the caliper adapter bolts.
Remove the rear axle shaft from the housing on dual rear wheels, refer to REMOVAL, 10 1/2 AA or REMOVAL, 11 1/2 AA .

Fig 2: Hub & Bolts
Courtesy of CHRYSLER GROUP, LLC

1 - Hub Bolts

2 - Socket
Remove the hub and rotor assembly.
Disassemble the hub from the rotor if needed by removing the bolts (1).