Light Duty
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - SUPPORT PLATE |
| 2 - MOUNTING NUTS |
- Install support plate (1) on axle flange. Tighten attaching bolts (2) to 68 N.m (50 ft. lbs.).
- Install parking brake cable in the brake lever.
- Install the park brake shoes. Refer to SHOES, PARKING BRAKE, INSTALLATION .
- Install axle shaft, go to INSTALLATION, 10 1/2 AA or INSTALLATION, 11 1/2 AA .
- Adjust brake shoes to drum with brake gauge. Refer to SHOES, PARKING BRAKE, ADJUSTMENTS .
- Install the rotor. Refer to ROTOR, BRAKE, INSTALLATION .
- Install the caliper adapter. Refer to ADAPTER, DISC BRAKE CALIPER, INSTALLATION .
- Install the caliper. Refer to CALIPER, DISC BRAKE, INSTALLATION .
- Install the wheel and tire assembly. Refer to SPECIFICATIONS .