Adapter, Disc Brake Caliper: Installation: Rear
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Caliper Adapter Wrench (special tool #10186, Wrench, Caliper Bolt) must be used to torque the upper caliper adapter bolts for the 2500 and 3500 series trucks.
- Install the caliper adapter mounting bolts (4) and tighten to specifications Refer to HYDRAULIC/MECHANICAL, SPECIFICATIONS .
- Install the anti-rattle clips (2).
- Install the inboard and outboard pads (1).
- Install the caliper mounting bolts and tighten to 30 N.m (22 ft. lbs).
- Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE .