LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Steering System - 2500 Hd & 3500 Hd) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Removal >> Bracket - 4500/5500

Bracket - 4500/5500

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Steering Damper, Linkage Bracket, Nuts & Bolts
GC0152015Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the steering damper mounting bolt and nut (2) at the linkage bracket (5) and position the steering damper (3) away from the bracket (5).
  3. Remove the mounting bracket bolts and nuts (1) and remove the bracket (5).
scientia non olet · About LEMON Manuals