LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Front Suspension & Wheel Alignment - 2500 Hd & 3500 Hd) >> Wheel Alignment >> Standard Procedure >> Alignment - Rack And Pinion Steering System >> Camber

Alignment - Rack And Pinion Steering System: Camber

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Move both pivot bolts of the lower control arm together in or out. This will change the camber angle significantly and little effect on the caster angle.

After adjustment is made tighten the lower control arm nuts to proper torque specification. Refer to FRONT, LINK AND COIL, SPECIFICATIONS .

scientia non olet · About LEMON Manuals