LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 334 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 65RFE Automatic Transmission - 1500)) >> Diagnosis And Testing >> P0884-Power Up At Speed >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK THE POWER AND GROUND CIRCUITS 
    1. This DTC is set when the Transmission portion of the Powertrain Control Module is initialized while the vehicle is moving in a valid forward gear.
    2. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
    3. Check all of the Fused B (+), Fused Ignition Switch Output and ground circuits to the PCM for an intermittent open or short to ground.
    4. With the scan tool, check the Event Data to help identify the conditions in which the DTC set.

      Repair 

      • Check all power and ground circuits to the PCM and repair as necessary.
      • Perform the TRANSMISSION VERIFICATION TEST. Refer to STANDARD PROCEDURE  .
scientia non olet · About LEMON Manuals