LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Electronic Control Modules (Service Information)) >> MODULE, Transmission Control >> Standard Procedure >> Drive Learn - RFE Transmissions >> Learn A Smooth Manual 2-1 PULLDOWN Shift As Well As A Neutral To Reverse Shift

Learn A Smooth Manual 2-1 PULLDOWN Shift As Well As A Neutral To Reverse Shift

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The transmission oil temperature must be above 110°F (43°C).

Use the following steps to have the TCM learn the LR volume.

  1. With the vehicle speed around 40-48 km/h (25-30 MPH) in Manual 2nd, perform manual pulldowns to Low or 1st gear at closed throttle.
  2. Repeat until the LR CVI becomes stable and the manual 2-1 becomes smooth. Refer to  1.
scientia non olet · About LEMON Manuals